---

New Products

• 13-3053 Diavite DH8 High Precision Surface Roughness Meter - Fantastic Special Offer!

  

  Includes FREE DIASOFT BASIC Software

  New high precision surface roughness meter for universal use in workshops and inspection rooms. VH model for use with probes with skids only. VHF model for use with probes with and without skids.

 

• 30-813-1001 Sylvac_S System LIN Digital Scales

  

 

• 30-816-1015 Sylvac S_Scale Work Horizontal/Vertical Digital Scales

  

 

• 30-830-0155 Sylvac Hi_Cal XZ Height Gauge

  

  New 2 axis height gauge from Sylvac.

 

• 30-840-0400 Sylvac Hi_Gage ONE Height Gauge - Hotlist Price!

  

  Available in 400mm and 600mm capacities, the robust new Sylvac Hi_Gage ONE Height Gauge is water and coolant resistant and designed to provide high levels of accuracy and repeatability throughout extended shop floor use.

 

• 30-903-0301 Sylav S_Mike Pro Ø2

  

  Complies with: DIN 863

 

• 30-903-0302 S_Mike PRO - BLADE

  

  Complies with: DIN 863

 

• 30-910-9502 Sylvac S_Cal Micron Caliper

  

 

• 30-981-7160 Sylvac Sylconnect

  

  Software allowing the connection of 16 Sylvac handtools to a computer by USB cable. No specific interface is required! The instruments can be directly connected to the USB port or via USB-Hub available on the market. Automatic recognition and USB port setting for each instrument. Jpeg picture import function and window value resizing. Direct values export to Excel worksheet. Possibility to connect one or many USB footpedals to drive different instruments. TO DOWNLOAD A FREE 30 DAY TRIAL, click here

 

• 60-6190HP Wyler BlueCLINO HP Precision Inclinometer

  

  BlueCLINO High Precision with Cast Iron Prismatic Base

 

• 60-6201 Frame Angular Levels

  

  These levels are ideal for checking both horizontal and vertical surfaces. Their prismatic base makes them suitable for both cylindrical and flat surfaces.

  Magnetic Spirit Level No. A48

  This level has strong magnetic inserts in its 150mm long base. They provide a positive hold on both flat and cylindrical vertical surfaces.

 

• 60-6290 Shaft Spirit Level No. A63.

  

  Prismatic base. Size 30 x 35mm. Wide viewing slots.

 

• 60-6502BS BlueMETER SIGMA

  

  BlueMETER Sigma is a further enhancement of the BlueMETER and has been developed as an intelligent display unit for the following electronic inclination measuring instruments.

  • BlueLEVEL
  • BlueCLINO and BlueCLINO High Precision
  • MINILEVEL NT and LEVELTRONIC NT (by means of cables only)
  • Clinotronic Plus
  • ZEROMATIC
  • ZEROTRONIC sensors

 

• CFBG Bowers Carbon Fibre Comparator Beam Gauge

  

  Designed to measure both internal and external diameters and lengths, the high modulus carbon fibre beam is stiff, lightweight and has an extremely low co-efficient of thermal expansion (CTE). Suitable for measuring high accuracy diameters and lengths up to 4000mm+.

 

• JSS Joint Strength System (JSS)

  

  Gagemaker's Joint Strength System (JSS) is a revolutionary breakthrough in enhancing rotary shouldered connection thread inspection

 

• LABCP300B Labconcept Premium 300 B Package

  

  The Trimos Labconcept represents the latest developments in the field of multifunction calibration machines. Capable of calibrating an extremely wide range of measuring instruments with incredible speed and accuracy the instrument is now the calibration machine of choice for some of the biggest UKAS and factory laboratories throughout the UK and beyond.

 

• MG011W Bowers MicroGauge - 2-point bore gauging 1-6 mm

  

  The new MICROGAUGE 2-point bore-gauging system has been designed specifically for the measurement of small bores between 1.0 - 6.0 mm. Featuring a completely new digital readout and extremely compact overall dimensions, the MicroGauge is truly a pocket-sized instrument. Digital readout and measuring head together are about the same size and format as a ballpoint pen which represents a big advantage for those needing to measure small precision parts and who need to have their gauge with them all the time. The clear LCD display is easily set using only two buttons and results are shown with switchable 0.01/0.001/0.0005 mm resolution. Data transfer is via Proximity-RS232 or Proximity-USB output. The measuring heads are equipped with spherical hard-chromed contact points and are set in appropriate setting rings. Like all Bowers bore-gauging products the MICROGAUGE system is available as individual instruments or as full sets. All setting rings are supplied as standard with UKAS certification.

 

• MHM-522M Moore & Wright Micrometer Heads

  

  Complies with BS1734 and DIN 863 where applicable

  Moore & Wright micrometer heads are available in a range of standard sizes and configurations. However, if you have specific requirements which are not covered by the models shown then please contact our Customer Service Department.

 

• MW110-15DFC Three Reading Digitronic Caliper DFC Series

  

  25% SAVING!

 

• MW192-20D Digitronic Mini Height Gauge 192 Series - Hotlist Price!

  

 

• MW200-01DBL Value Line Digital External Micrometer 200 Series - Hotlist Price!

  

  Standard: DIN 863

 

• MW215-01BL Value Line External Micrometer Set 215 Series

  

  Standard: DIN 863

 

• MW217-01 Micrometer with Interchangeable Anvils 217 Series

  

  Standard: DIN 863

 

• MW270-01 Point Micrometer 270 Series

  

  Standard: DIN 863

 

• MW300-01 Tubular Inside Micrometer 300 Series

  

  Standard: DIN 863

 

• MW312-25D Value Line Digital Micrometer Head 312 Series

  

  Standard: DIN 862

 

• MW504P Powder Coated Calipers & Dividers Hotlist Price!

  

 

• MW505-01 Digitronic Protractor - Hotlist Price!

  

 

• MW510-01 Indicator Bevel Protractor

  

 

• MW516DIG Digitronic Inside / Outside Calipers Hotlist Price!

  

 

• MW612-01 Universal Centre Finder with Indicator 612 Series

  

  Standard: Factory Standard

 

• MW710-01 Carbide Gauge Blocks 710 Series

  

  Standard: DIN 861

 

• MW715-01 Micrometer Check Gauge Block Set 715 Series

  

  Standard: DIN 861

 

• MWCAE201M External Minor Calipers

  

 

• MWCAI201M Internal Minor Calipers

  

 

• POR0002 CV Portable Analogue Hardness Testers - CV Instrumatic

  

  A fully mechanical instrument of the highest precision, robust, and maintenance free. The large clearly marked dials on these unique instruments cover a full range of hardness values in Vickers, Brinell, Rockwell a, b, c, and Kp/mm2 covering to national and international standards.

 

• W-3001 Load Cell Closed Loop Brinell Hardness Tester EW-3000 Series

  

  The advanced, Load Cell, Force Feedback Closed Loop, load application system of the EW-3000 allows a wide variety of test loads ranging from 30kgf to 3000kgf in one hardness test frame.

 

• W-700-AS Universal Hardness Tester VERZUS 700 Series

  

  The VERZUS 700 series is a new generation of hardness testing machines. Featuring closed loop system based on a precision load cell, guarantees the best GR & R results ever seen on Universal hardness testers. Test forces ranging from 1 to 250kgf.

 

• W-7500CCD Universal Hardness Tester NEXUS 7000 CCD Series

  

  The NEXUS 7000 CCD universal hardness tester is based on the successful NEXUS 7000 load cell closed loop concept with indenter/objective swivel system. The success of the NEXUS 7000 concept now continues in the new NEXUS 7000 CCD.

  The NEXUS 7000 CCD is a hardness tester for all hardness procedures according to Rockwell, Superficial Rockwell, Brinell,Vickers and Knoop. Also possible are ball and indentation hardness testing for thermo plastics and the new Vickers depth (HVT) and Brinell depth (HBT) procedures.

  The load range goes from 1 to 250kgf (optional from 0.5kgf). All procedures complying to EN/DIN/ISO, ASTM and JIS.

  The new user interface IMPRESSIONS 2011 guarantees hassle free tester operation with a minimum amount of training. IMPRESSIONS 2011 allows you to operate the tester’s main functions but also incorporates advanced algorithms for automatic impression detection and hardness measurement.

 

• W-9001 Universal Hardness Tester Nemesis 9000 Series

  

  The NEMESIS 9000 Series represents the latest top of the range development in universal hardness testing. Modern design, innovated technology, multi purpose hardness testing instrument, based on the application of mechatronic components and high resolution video machine vision systems. A superior level of precision combined with high definition imaging creates an almost unlimited field of applications.

  The NEMESIS 9000 Series represents universal hardness testing in the most versatile meaning. Aircraft engine parts, automobile parts, production lines, general quality assurance and laboratory use are all fields covered by the NEMESIS 9000 Series.

  Manual operation or full scale automation to the highest possible level are both standard on the NEMESIS 9000.

  The NEMESIS 9000, Load Cell, Closed loop, Force feedback system is suitable for the following:

 

• W-9501 Universal Hardness Tester NEMESIS 9500 Series

  

  Free Shipping, Installation* and Traceable Calibration Certificate (worth over £1000.00)

  *subject to suitable foundations and on site lifting gear

  The NEMESIS 9500 is the universal hardness tester most suitable for heavy duty testing in the Eseway standard range of testers. Partly based on the technology of the NEMESIS 9000. Built for tough environments, the floor type welded frame reaches a height of 2 meters and offers a work space of not less than 650mm height and a throat depth of 300mm.

  Rockwell, Vickers and Brinell, but also pure depth test methods such as H, HVT and HBT are part of the standard test procedures of the NEMESIS 9500. 3 models cover a range of test loads either up to 250kgf, 750kgf or 3000kgf.

  The frame of the NEMESIS 9500 is equipped with a heavy duty motorised spindle, allowing positioning of the test piece on the required working height. The NEMESIS 9500 has a descending test head allowing each test piece to be tested on an ergonomic working height. The linear actuator of the NEMESIS 9500 is equipped with a load cell closed loop system guaranteeing excellent accuracy and a wide range of fast testing procedures.

  The test head is equipped with a 6 positions modular turret (indenters and objectives) and an optical zoom video system with 5mp HD camera. High performance PC driven automatic and manual indent measurement with automatic filing and storage functions.

  Refined algorithms for automatic measurement on materials normally less suitable for automatic measurement.

  Three years free firmware upgrade as standard.

 

• W-CV-MZ630B CV Stereo Zoom Microscope

  

  Stereo microscope with incident and transmitted illumination.

 

• W-INMR/01 Portable Magnetic Rockwell Tester - W-INMR/01

  

  10% SAVING!

  Magnetic base hardness tester designed according to the principle of Rockwell hardness testing.

 

• W-TT210 Coating Thickness Gauge - TT210

  

 

• W-TT270F Coating Thickness Gauge TT-270

  

  The measuring methods of the TT-270 are magnetic induction (F) and eddy current (N). When a F series probe is connected, the unit measures non-magnetic coating on ferro substrates, when a N series probe is connected, the unit measures nonconductive coating on non-ferro substrates.